Label making machine Flexor

Paper-, board-, corrugated converting machines

Technical data:

Machine:
Label making machine Flexor
Article No.:
4968
Producer:
Flexor
Type:
Fleor B 380
Size:
380 mm
Capacity:
300 m/min

Description:

Used label making machine:

 

max.web width: 380 mm

max.speed: 300 m / min

 

Unwinder:

Max.roll diameter: 800 mm

Pneumatic unwinding spindle: diameter 76 mm

Programmable end of roll

 

Single rewinder:

Max.winding diameter for individual winding: 500 mm

Pneumatic unwinding spindle: diameter 76 mm (easy spindle change)

Winding spindle with its own servo drive for precise winding tension

Winding tension is given in Newtons: 1 module

 

Cutting unit:

Longitudinal cutting unit with transverse register +/- 7 mm and cassette insert: 1 set

Setting unit for the shear blades outside the machine

Shear knife set (upper and lower knife) 12 pieces

Minimum. Width of the longitudinal section: 20 mm

Cutting between two servo driven preferred shafts: 1 module

 

Web tension control:

Complete control of the rewind tension thanks to servo-controlled rewinder

Pneumatically controlled preferred shaft with its own servo motor

Diameter control on all shafts (unwinding shaft, winding shaft, lattice shaft): 1 module

 

Counter:

Meter and decimeter counter

Label counter for transparent labels

Automatic calculation of the braking distance

Daily production counter (only counts when the machine is running)

Total machine runtime counter

Total wrapped meters

 

Ergonomics:

E + L web edge control with built-in splice table with pneumatic terminal strips

PLC controlled system / touch panel in German

Roll end bracket

Antistatic brush

Foot pedal (jog / stop)

Additional control panel in the rear area

250 job memories

 

Equipment:

Missing label unit max. 12 lanes: 1 module

Missing label sensors for normal labels: 10 pieces

Waste paper take-up with 76 mm expansion shaft

      - max.winding diameter 400 mm

      - max.speed 30 m / min

      - 76 mm expansion shaft

      - Position can still be defined

 

Technical specifications:

Length: 3550 mm

Width: 1620 mm

Height: 1900 mm

Mass: 3000 kg

Voltage: 3x400 V / 50HZ

Power: 16.5 kW

Air requirement: min. 6 bar

 

* Listed since: 2021-12-21

Send request

Privacy Policy