Stock preparation

Used machines to produce pulp and for the processing of waste paper to usable fiber material.

Main image	Name	Producer	Type	Size	Capacity
—	Pressure screen Lamort ADS 5 Used pressure screen Lamort ADS 5 Design double-chamber pressure sorter, first chamber perforated plate with holes, second chamber basked with slots. Drive: motor 75 [kW], belt transmission, Maximum concentration 3 – 4 %, depending on pulp parameters and basket/plate design.	Lamort	ADS 5	ADS 5	80 tds / day
1 available	HD Cleaner Andritz Ahlcleaner RB 300 HD the AhlCleaner RB300Hd are large-diameter cleaners designed to operate at stock consistencies of up to 4.5%. Heavy debris, such as sand, dirt, metal, glass, along with a high percent- age of smaller impurities, can easily be removed with minimum amount of fiber loss by the utilization of a junk trap. These cleaners are used in recycled fiber lines for coarse particle removal and in bale pulp lines as protection before refiners and deflakers. durable plastic and ceramic cones directions of feed and accept connections can be selected Minimum space requirements Easy to operate, maintain, and install Special designed spool piece for reduced wear on junk trap gate valve	Andritz	Ahlcleaner RB 300 HD	—	1900 l/min
1 available	Reject press Kufferath Akupress A 250 Used screw press made by company Kufferath in overall good condition, with drive and gearbox, Drive power 15 KW	Kufferath	Akupress A 250	250 mm	—
1 available	Kufferath Akupress A 500 with additional press section as spare part Used reject press, screw press made by Kufferath	Kufferath	Akupress A 500	500 mm	—
1 available	Screw press for sludge Kufferath Second-hand Kufferath Akupress B 500 N Screw diameter: 500 mm Outlet dryness: Up to 55 % Capacity is depending of inlet consitency: At 35 % the capacity is 3 t/h	Kufferath	Akupress B 500	500 mm	80 t/24 h
1 available	Sludge press Kufferath Akupress B 500 N Second hand Kufferath Akupress B 500 N sludge press for sludge with fiber content Screw diameter is 500 mm Up to 55 % dry content Capacity is depending of inlet consitency at 35 % the capacity is 3 t/h	Kufferath	Akupress B 500 N	500 mm screw diameter	up to 100 t/day
1 available	Wet lap machine Andritz 800mm with cutter / layboy Used Double wire wet lap machine made by Andritz with cross cutter and layboy. Manufacturer of the wet lap machine: Andritz Condition: refurbished Capacity 30 Tpd Andritz press with 2 x 7,5 kW power motor Working width: 800 mm Inlet consistency: 4 - 4,5% Outlet consistency: 43-45% NIP’s : 1. NIP – 50 N/mm, 2. NIP – 100 N/mm 3. NIP – 150 N/mm 4. NIP – 250N/mm	Andritz	ANDRITZ DSP 800 mm	800 mm	30 t/day
1 available	Ascending screw thickener Lamort Inlet consistency: min: 1,2 % Optimal: 4 % Max: 7 % Outlet consistency: Min: Optimal: 12 % Max: 20 % and more depending of pulp	Lamort	Ascending screw thickener M16	—	—
1 available	Voith Turboseparator ATS 20 - Used condition - Basalt lined	Voith	ATS 20	20 / 21 / 22	—
—	Turboseparator ATS 20 housing only Empty housing, complete overhaul recommended	Voith	ATS 20	—	—

previous
1
2
3
4
5
6
7
8
...
20
next