Sales list for paper production machines
Sales list for paper processing machines

PM carton board

Second-hand paper machines to produce carton, board, paperboard, cardboard, containerboard

Main image Name Producer Type Size Capacity
—

Paper board machine 2500mm, GSM upto 350 for sale

Parameter Details
Total Running Hours Approx. 3 years maximum
Paper Formation 6 sets Ultra Formers cylinder (Ø 1,866 mm × L 2,550 mm)
Maximum Trim Width 2,500 mm roll width
Type of Paper Produced Linear board kraft, multi-layer sack kraft paper
Number of Presses 3 sets
Number of Dryers 50 pieces (Ø 1,860 mm × L 2,650 mm)
Number of Canvas Dryers 12 pieces (Ø 1,220 mm × L 2,650 mm)
Calendaring Units (Main Machine) 2 sets × 7-roller stack
Coating Facility Inline with paper machine; 1 unit coating machine
Calendaring (Coating Machine) 1 set of 7-roller stack
Rewinding (Coating Machine) Double decker rotary type rewinders
Rewinding (Paper Machine) Pope Reel rewinder
Sheeting Duplex sheeters and cutters
Roll Cutting & Rewinding 1 unit roll-cutter and rewinder
— upto 350 GSM 2500mm at reel 100 Tons per day
1 available

Cylinder mould board machine

Used cardboard machine:

Operating speed: 100 m/min

Grammage: 300 bis 900 g/m²

MG cylinder with German press

In-line training structure

Calendar

In-line guillotine

QLS and online colorimetry

Automatical pallets wrapping unit

Materials: white and grey cardboard sorts, platerboard cardboard

 — — ca 2000 mm 100 m/min
1 available

Cardboard machine 2850 mm

Grey millboard production machine


Grammage range: 1000 - 2000 GSM
Width: 2850 mm
Capacity: 36 t/day


Consisting of
Approach flow system:
1 Voith size 10 pressure screen
1 Finkh vibrating screen
1 Andritz Mixing pump


Board machine:
2 cylinder mould
Coutch roll


Forming section with:
Forming roll: 1500 mm diameter
Pre press roll: 350 mm diameter
Breast roll: 460 mm diameter
Complete with drive, spare rolls


General refurbishment: 1991
Refurbishment: year 2007, Renewing of cylinder mould with couch roll,
Installation of Siemens S7, Framing in stainless steel
Octopus distributor in stainless steel.
Table, working width 3.000 mm
Length: 6.000 mm


Table
Working width: 3.000 mm
Length: 7.000 mm
With guide roll and embossing calander


Table
Working width: 3.000 mm
Length: 5.500 mm


Length cutting unit
Working width: 4.00 mm
Length: 2.500 mm
With water jet cutting


Steam - Flat dryer
Made by: Schilde
Transport with chains
Working width: 4.800 mm
Dryer length: 18.000 mm
With ventilators
Refurbished: 2008


Table
Working width: 4.800 mm
Length: 3.000 mm
Refurbished: 2007


Gas Dryer
Heating power: 1.400 kW
Made by: Dornier
Working width: 4.00mm
Dryer length: 14.000 mm
With heat exchange and heat recovery
Year: 2007


Flat dryer
Hot air drying
Made by: BSH
Working width: 4.800 mm
Length: 25.000 mm
With 5 Drying chambers
Gas burner Ventilators
Heat recovery
Refurbished: 2008


Table
Length cutting device
Made by: Schohr
Year: 1973


2 Hydraulical layboys

 European Cylinder mould 2850 mm 36 t/ 24 h