PM carton board

Second-hand paper machines to produce carton, board, paperboard, cardboard, containerboard

Main image	Name	Producer	Type	Size	Capacity
—	Duplex board machine 2540 mm Second hand Duplex board machine 2540 mm Location: Asia	—	—	2540 mm	100 t/day
1 Units	Cardboard machine 2850 mm Grey millboard production machine Grammage range: 1000 - 2000 GSM Width: 2850 mm Capacity: 36 t/day Consisting of Approach flow system: 1 Voith size 10 pressure screen 1 Finkh vibrating screen 1 Andritz Mixing pump Board machine: 2 cylinder mould Coutch roll Forming section with: Forming roll: 1500 mm diameter Pre press roll: 350 mm diameter Breast roll: 460 mm diameter Complete with drive, spare rolls General refurbishment: 1991 Refurbishment: year 2007, Renewing of cylinder mould with couch roll, Installation of Siemens S7, Framing in stainless steel Octopus distributor in stainless steel. Table, working width 3.000 mm Length: 6.000 mm Table Working width: 3.000 mm Length: 7.000 mm With guide roll and embossing calander Table Working width: 3.000 mm Length: 5.500 mm Length cutting unit Working width: 4.00 mm Length: 2.500 mm With water jet cutting Steam - Flat dryer Made by: Schilde Transport with chains Working width: 4.800 mm Dryer length: 18.000 mm With ventilators Refurbished: 2008 Table Working width: 4.800 mm Length: 3.000 mm Refurbished: 2007 Gas Dryer Heating power: 1.400 kW Made by: Dornier Working width: 4.00mm Dryer length: 14.000 mm With heat exchange and heat recovery Year: 2007 Flat dryer Hot air drying Made by: BSH Working width: 4.800 mm Length: 25.000 mm With 5 Drying chambers Gas burner Ventilators Heat recovery Refurbished: 2008 Table Length cutting device Made by: Schohr Year: 1973 2 Hydraulical layboys	European	Cylinder mould	2850 mm	36 t/ 24 h
—	Duplex board machine 2590 mm Pulper: One pulper for the top and one for the bottom. Two different lines Max width at pope: 2590 mm 9 forming cylinders (diameter: 1250 mm) Capacity: 75/80 Tpd Speed: 17 to 60 m/min Grammage: 320 - 1000 gsm Product: white/white, grey/grey, brown/grey, white/grey N°26 dryer cylinders (diameter: 1500 mm) MG cylinder (diameter: 3500 mm) Hood by Brunnschweiler. QCS: first scanner before dryer section with Sr90 head for grammage and moisture; second scanner before pope, Kripton head 5/6 pope spools Machine can work with pope winder or bypass the pope and cut directly sheets on a Pizzolato sheet cutter Duplex. The PM is ready for being removed. The PM was built in 1979 and renovated, for the first time, in 1988 when we decided to add 5 dryer cylinders to the dryer section and substitute the sheet cutter. The second big revamping of this machine was done at the end of 2015 in order to improve the quality of the cardboard, to speed up the production and reduce the inefficiencies. - It was added 2 forming cylinders, and a suction press to the forming section, the stock preparation was importantly improved adding new Kadant’s deflaking and separation systems (hydrapurge, floatpurge, UK300, Liquid Cyclone and a Junk trap). - In 2015 the electric system, panels, DCS and QCS software, for the automatization of the process. Brand new electric cabins for PM and stock preparation too were totally changed. New software that operates the machine and the stock preparation as well (entire system powered by Eil srl). - The Steam system was powered by Deublin italiana. It was completely rebuilt, changing joints and siphons for steam and condensate removal. everything operated by Eil Software. - It has choosen Kadant’s stock preparation changing from a refining stock prep to a deflaking one that helped us to eliminate large particles from broke and keeping the technical resistance of the fibers. - For the revamping of the wet part we decided to work with local mechanical workshops. The quality was improved. The cardboard had no wrinkles, very smooth surface and really clean if you consider raw materials that it used to use (urban waste). The 400gsm for example, was used for premium oil boxes dividers. For its smooth surface was perfect for high level Oils and wines and prosecco. Used to protect by remaining tight and restricting the movement of the primary product during transit, this was really important to not abrade the labels, especially for premium product.	European	Duplex Board Machine	2590 mm	75 / 80 tpd
—	Duplex board machine 2900 mm Max width at the pope: 2900 mm 7 forming cylinders ( diam. 1250 mm) Capacity: 75 tpd Speed: 17 to 45 m/min Grammage: 400 - 1000 gsm Product: white/white, grey/grey, brown/grey, white/grey N° 26 dryer cylinders (diam. 1500 mm) MG cylinder (diam. 3500 mm) Hood by Valmet 2 x metering bar coaters BMB, unused because there is no coating color preparation. Installed in 1991 N° 4 dryer cylinders after coater QCS: first scanner before dryer section with Sr90 head for grammage and moisture, second scanner before pope, Kripton head 5/6 pope spools Machine can work with pope winder or bypass the pope and cut directly sheets on a Pizzolato sheet cutter Duplex, 6 slitters Machine was stopped in 2014 The stock preparation is not included The PM was built in 1962 and completely renovated in 1992, when the side parts of the wet section were replaced and Valmet totally rebuilt the hood of the dryer section and also 6 dryer cylinders were added. It worked until the end of 2014 when its production was shut down . One of the best quality of this machine is that it can be operated just by a direct current 145 kwh electric motor, In reference to the forming section, the dryer section and the sheet cutter as well. It conveys the idea of how much energy can be saved with its production.	Gino Celli	Duplex board machine	2900 mm	75 tpd
1 Units	Duplex board paper mill 400 t/day 3400mm Duplex board paper mill(500g/m2) Make: Japan/Finland/Korea Year: 1984 Productivity: 450ton/day(Best), 350ton/day(average) GSM: Max.500g/m2 -The number of HEAD BOX: 7sets -Fourdriner type -Dryer: 77ea(Air type+Electric type) General -Make: Japan, Finland, Korea -Manufacturing year: 1984 Coated Duplex Board Paper with Gray or White Back 3400mm trim(at Reel) Speed: 330m/min Productivity: 450ton/day(Best), 350ton/day(average) Provided coating capability with Bar coater(T+B+T), soft nip calender, ● Headbox Make: (Japan) Year: 1984 Closed Air Cushion Type Quantity: 7Sets 3600mm pond width ● Former: 7Sets (Korea) Former type: Fourdriner type,, Cylinder type Fabric(Wire) 3720mm×8430mmL Forming Suction Roll(Ø1,200) Couch Roll(Ø650), Breast Roll(Ø500) ● Press Section (Korea) Type: Bi-Nip Press(Nip is two) Suction Center(Ø900), Suction Bottom(Ø750), Side Roll(Ø1000) 1st Press Suction Bot Roll(Ø900), Top Roll(Ø900) 2nd & 3rd Press Top(Ø1000), Bot(Ø900) Rolls; Felt rolls, Worm Rolls, Paper Rolls ● Main Dryer Section (60)1550mm dia. × 3650mmL face dryers with Doctor Hood & Ventilation, Steam & Drainage Canvas Rolls, Auto Guide, Stretcher 5-section, Open Gear Type ● Size Press Two Roll Type Top Roll(Ø700), Bot Roll(Ø720) ● After Dryer Section (14)1550m0 dia. × 3650mmL face dryers with Doctor Hood & Ventilation, Steam & Drainage Canvas Rolls, Auto Guide, Stretcher 1-section, Open Gear Type ● #1 Calender; 1 Stack Top(Ø750_Heating), Bot(Ø460_Swimming, Hard) Make: Japan ● Barflex Coater(Top, Back), Make:BMB Backing & Applicator Rolls Air Dryer Chamber: 2+2Sets ● Barflex Coater(Top) Make: Fuyo(Japan) Backing & Applicator Rolls Air Dryer Chamber: 5Sets Rolls: Cooling, Paper Rolls ● Coater Dryer Section: (6) 1530mm dia. × 3570mmL face dryers with Doctor Hood & Ventilation, Steam & Drainage Canvas Rolls, Auto Guide, Stretcher 1-section, Open Gear Type ● #2 Calender; 2 Stack Top(Ø750_Heating), Bot(Ø460_Swimming, Hard) Make: Japan Top(Ø750_Heating), Bot(Ø500_Swimming, Soft) Make:Japan ● Cooling Drum Ø750, 2Sets ● Reel ○ drum(Ø900), face(3570mmL) ○ Spool Rolls(Ø626), 35EA ● Drive & QCS Make: Japan DC Sectional Drive #1,2 Scanner(BW, MOI, Calipe) #Electricity: 12MW is necessary. #Steam 2.5ton is necessary per 1ton paper production.	Japan/Finland/Korea	—	3400 mm	350 t/day