Finishing / Converting

Used machinery for the printing and paper industry; used machines for cutting paper, cardboard, and pulp; paper roll winding machines; used ream wrapping machines; used paper roll unwinding machines; used paper calenders, etc.

Main image	Name	Producer	Type	Size	Capacity
1 available	BICMA Sanitary Napkins Machine Sanitary Napkins / towel / pad machine made by BICMA (Germany) in very good condition Working direction seen from the operator's side: from the right to the left Fabrication of the products in the machine: lengthwise, (single layer) Production centre: 225 mm from the mounting plate Tranfer conveyor height to packaging machine: 1100 mm production speed.: 120 m/min air pressure: min. 6 - max.8 bar air quantity: min. 1500 ltrs/min water pressure: min. 3 – max. 4 bar water quantity: min. 100 l/h	BICMA Hygiene Technologie GmbH	BI 13-00	—	—
1 available	Wet wipes line PCMC converting line (Year 2004) Saw cuter 300 cuts/min 20 unwinders Fife quidding system 20 pcs 100 stacks per minute Ilapack flow pack (Year 2004) Up to 100 packs per minute ATP Robot lid applicator (Year 2011) Up to 100 packs per minute	PCMC	—	—	100 packs per minute
1 available	Flame Treatment System for Surface Activation of Paper or Paperboard Flame Treatment System for Surface Activation of Paper or Paperboard The flame treatment process is used to activate the surface of paper or paperboard. The flame modifies the outermost molecular layers of the surface without burning the material. Typical Purposes -. Improved Printability The surface energy is increased, resulting in: Better adhesion of printing inks More uniform ink distribution Reduced ink rub-off and abrasion - Improved Coating Adhesion Before applying: Coatings Varnishes Adhesives Plastic coatings (PE, PP) the surface is activated to enhance coating adhesion. - Treatment of Silicone-Coated or Heavily Sized Papers Some specialty papers have very closed, low-energy surfaces. Flame treatment can slightly oxidize the surface, thereby improving wettability and adhesion properties. - Paperboard and Packaging Industry Flame treatment was particularly common for: Beverage cartons Packaging board Label papers Composite materials (paper/plastic laminates) Technical Principle The flame briefly generates surface temperatures of several hundred degrees Celsius. During this process: Waxes Organic contaminants Weakly bonded surface layers are removed or decomposed, while polar functional groups are simultaneously formed on the surface. These polar groups increase surface energy and significantly improve adhesion.	—	—	—	—
1 available	Paper bag machine Profama SOS 030-CE 6 colour printers – 2 ply Photo eye pre-printed reels Plates: 18 – 20 – 24 – 26 - 31 Gears: 44 – 48 – 50 - 54 – 60 – 70 Printing cylinders: 44 – 48 – 50 – 54 - 60 – 70 Bag width: 18 - 34 cm Bag length: 34 - 70 cm Tube length: 44 - 88 cm	Profama	SOS 030-CE	—	—
1 available	W+H Flat und Satchel Paper Bag, Block Bottom Machine WH triumph 3 Flat and satchel paper bag Block bottom To produce paper vacuum cleaner dust bag An additional machine to seal another open end (separately available if needed) Bottom bags from 12 cm to 24 cm wide Tube bags until 50 cm long.	Windmoller & Hölscher	Triumph 3	—	—
1 available	Pallet packaging system with shrink oven	OMS https://oms-group.com/	—	—	—
1 available	Honsel paper bag machine • Single-sided roll closure • Feeder for cardboard flanges for vacuum cleaner bags • Maximum working width 500 mm • Storage table with counter and feeder • Folding table (can be used as an alternative to the storage table)	Honsel	Honco 722	—	—
1 available	Corrugated board converting machine DY Slotter Second hand DY Slotter Type: FPS Gold 1227 3 color printing unit (1 is defect) Double slotter unit Rotary punch Stacker Automatic jogger Automatic prefeeder (defect) Dimensions: Min. 300x500 mm / Max. 1450x2800 mm	DY Machinery	FPS 120 Gold 1227	—	—
1 available	Corrugated board converting machine stamping machine Manufacturer: Marumatsu Type: SAPV-1612 Stamping machine Clutch was replaced in 2024 Machine inspection and minor wear parts replaced in 2024 Other spare parts will be installed before sale	Marumatsu (Japan)	SAPV-1612	—	—
1 available	Corrugated board converting machine stapling machine Bahmüller SC 25/29 S Stapling machine Machine unit: MS 25/29 WM-03494 Stapling unit: HS 750 WH-03495 Maximum cutting width (folded): 2900 mm Minimum cutting width (folded): 340 mm Sheet height (WM) max.: 2500 mm Sheet height (WM) min.: 300 mmm Stapling speed: 750 cl./min Additional hot glue unit from Bühnen model 4100	Bahmüller	SC 25/29 S	—	—

previous
1
...
9
10
11
12
13
14
15
16
next