Sheet cutter / Cross cutter
Used cross-cutters for the paper industry. Used cross-cutters for paper from all manufacturers. Cross-cutters are used to convert finished paper or cardboard rolls into sheets.
| Main image | Name | Producer | Type | Size | Capacity |
|---|---|---|---|---|---|
1 available |
Sheet Cutter Asitrade 1450mm2 unwind stands was used for testliner Knife load ca 600 g |
Asitrade AG | — | 1450mm | — |
1 available |
A3 / A4 line, sheet cutter with 5 unwind stands, ream wrapping, accumulator, boxer, palletizerSecond hand Ream Wrapping Line Consisting of sheet cutter with 5 unwind stands, sheeter, ream wrapping, accumulator, boxer, palletizer 1) Paper qualities (cut & wrapped): copy / offset paper weight 70-90 g/m². Size A4: 210 x 297 mm long grain A3: 420 x 297 mm short grain Height of ream: 48 – 63 mm. Wrapping material - inside / outside PE – Laminated Bleach Kraft paper 90 g/m². - inside PE - Laminated Bleach Kraft paper 110 g/m². - Clear Wrap with PP film. - outside Polyester - Laminated Bleach Kraft paper 90 g/m².
2) Cut-size-sheeter to produce A3 and A4 reams 8 pockets Number of unwinds: 5 pc. 1995. Chuck diameter: 6". Roll diameter: 1500 mm. Working width: 1750 mm. Production speed: 350 m/min. Max package discharge reams / min: 94 reams / min (A4 - 500 sheets / ream) 47 reams / min (A3 – 500 sheets / ream) 3) Ream wrapper Pemco Model 34 HSL. (2000) 4) Ream inspection/rejection system Pemco Model 124. (2000) 5) Ream stacker/accumulator. Pemco Model 135 L. (2000) 6) Case packer/lidder. Pemco 161 L- HS. (2000) Formation single and double stacks: - 10 reams / case: A4 - 5 reams / case: A4 - 5 reams / case: A3 Carton design - E.Flut white top. - Carton with lid board and side flap at the narrow side in case of 5 reams and 10 reams in one carton. 7) Case labeler. Pemco Model 72 LHM (2000) 8) Case strapping machine. Pemco Model RO-TRS-4 (2000) 9) Hot-melt group type NORDSON. 10) Connection conveyors Pemco 2000 10) Palletizer Certus Model CU-R 1.500 (2000) |
Will | SLK 175.8-L | 1750mm | — |
1 available |
Sheet cutter synchro -fly 1450 mmsecond hand synchro fly sheeter Milltex synchroflex 8 real stands with synchro fly sheeter with electronics and with auto pallet change option. Paper qualities – uncoated paper weight 60-170 g/m². Number of unwinds – 8 pc. Max. production speed – 300 m/min. |
Miltex | Milltex-Synchroflex | 1450 mm | — |
1 available |
Sheet cutter by Meltog 1500 mmSecond hand Sheet Cutter Cuting width 300 – 1500mm Cutting length 400-1560mm Two shaftless unwind stands for two rolls each Max. diameter on uwind stands 1500mm Core for unwinding 70-305mm Knife load 50-400gsm |
Meltog | — | 1500 mm | — |
1 available |
Sheet Cutter Strachan & Henshaw 1300 mmSecond hand sheet cutter Cuting width 300 – 1300mm Cutting length 300-1300mm Unwind stand for two rolls Max. diameter on uwind stands 1500mm Core for unwinding 70 – 152 mm Knife load 70-400gsm |
Strachan & Henshaw | — | 1300 mm | — |
1 available |
Sheet cutter Jagenberg Synchro 300 - 1650 mmManufacturer: Jagenberg Type: synchro 300 - 1650 Primary reels diameter: min. 430 mm - max. 1350 mm Rells face width: min. 480 mm - max. 1600 mm Core diameter: 150 mm Sheet width: min 450 mm single sheet - min 320 mm double sheet - max. 1460 mm Sheet length: min 450 mm - max 1600 mm Loading cutting knife: 920 g/m² Angular tolerance: 1mm up to 1600 mm sheet length Sheeting tolerance: 1 mm up to 1000 mm sheet length Grammage range: min. 80g/m² - max. 380g/m² Max height of paper stacked: 1700 mm icluding pallet Speed: max. 250 m/min Potential running webs: 8 |
Jagenberg | Synchro 300 - 1650 | 1600mm | — |
1 available |
Sheet Cutter Synchro AS 116 Jagenberg 1650 mmManufacturer: Jagenberg Type: synchro AS 116 Primary reels diameter: min. 900 mm - max. 1500 mm Rells face width: min. 480 mm - max. 1650 mm Core diameter: 150 mm Sheet width: min 450 mm single sheet - min 430 mm double sheet - max. 1630 mm Sheet length: min 530 mm - max 1600 mm Loading cutting knife: 900 g/m² Angular tolerance: 1mm up to 1600 mm sheet length Sheeting tolerance: 1 mm up to 1000 mm sheet length Max height of paper stacked: 1800 mm including pallet Speed: max. 300 m/min Potential running webs: 6 |
Jagenberg | Synchro AS 116 | 1650 mm | 180 t/d |
1 available |
Sheet cutter for pressboard- Cutting device lengthwise and crosswise for cutting pressed board - Longitudinal working width approx. 2,300 mm - Cross working width approx. 4,400 mm - Without SPS control, control takes place via light barriers, pneumatics and time relay - Cutting technology: cutting knife - Stepless positioning of the knives along the knife rollers - The immersion depth of the knives can be adjusted - Partial original documentation available - Dimensions of cutterbars, feed table, deflection table, discharge table: 11.0 x 7 m (L x W) |
Central Adams | — | — | — |
1 available |
DIN A4 paper converting lineDIN A4 paper converting line for sale The following machines are also included: A cardboard packaging machine, a strapping machine, and a stacking machine are included.
|
CHM | A4 Line | — | — |
1 available |
Sheet cutter for cutting foilsMax. Material width: 1700 mm Max. Roll diameter: 800 mm Inner diameter sleeves: 152 mm (6'') Max. Roll weight: 750 kg Min. stack length: 250 mm Max. stack length: 2200 mm Power supply: 3*400V / 50Hz + MP and protective conductor Rated operating current: 12 KVA Fuse protection: 32A Compressed air system pressure: min. 5 bar Compressed air consumption: approx. 100-150l (normal liter / min) Ambient temperature: +18°C to +24°C Tolerance: up to 1000 mm length +/- 0,5 mm from 1000 mm length +/- 0,5% Translated with www.DeepL.com/Translator (free version) |
Robust | FSM | — | — |
