Thickener / Dewatering / Washer
| Main image | Name | Producer | Type | Size | Capacity |
|---|---|---|---|---|---|
1 available |
Screw press for pulp Thune SP32LScrew press for pulp, made by Thune Type SP 32L in good condition Location Germany |
Thune | SP32L | — | 60 t/day |
1 available |
Twin wire press Andritz high loadTwin wire pressType: high loadInlet consistency 3–10%Outlet consistency 45–55% (material‑dependent)Line pressure capability Up to ~180–200 N/mm (higher than standard presses)Capacity Highly dependent on width; typically 500–1500 kg TS/hThe HD Twin Wire Press is designed for:High‑load industrial dewateringPulp washing (mechanical, chemical, TMP, CTMP)Sludge dewatering under elevated pressureApplications requiring higher press forces than standard CPF unitsThe HD version is essentially a reinforced, upgraded press section built to withstand significantly higher line pressures and mechanical loads. |
Andritz | Twin wire press high load | — | — |
1 available |
Washer Black Clawson DNT 200Ash Washer or thickener made by Black Clawson Type 200 in refurbished condition Drive 33 KW The DNT Washer is ideal for removing ink, ash and other contaminants from a variety of furnishes. High speed dewatering permits efficient removal of ink and ash from fiber, producing high tonnages of thoroughly washed stock in a compact space. The unit is cantilevered to use an endless wire and is available in two sizes - the Model 100 and 200. The DNT has high feed stock capacity and efficient washing, and is dewatered multiple times to produce highly washed and thickened stock before it is discharged from the washer.
|
Black Clawson | DNT 200 | 200 cm | 150 t/day |
3 available |
Screw press for Pulp Thune SP 45 SLScrew press for pulp Thune SP 45 SL in good condition |
Thune | SP 45 SL | — | 120 t/day |
3 available |
Hedemora Rotary Disc FilterSecond hand Hedemora disc filter Model 5 09/14 316SS Diameter: 16,5' |
Hedemora / Celleco | 5 | — | — |
1 available |
Bellmer TurbodrainUsed Bellmer Turbodrain in good condition Including: Pumps |
Bellmer | Turbodrain | ca. 3m | — |
1 available |
Twin roll press by Metso TRPW-1572Model: TRPW-1572 Rolls dia. : 1.5m X7.2m Hydraulic Drive: 400HP Toshiba motor, 1800 RPM, 60Hz |
Metso | Twin roll wash press TRPW-1572 | 1.5 X7.2m | 600- 700 T/D |
1 available |
Screw press for pulp 350 mm screw diameter 18 t/dayScrew press for pulp 350 mm screw diameter 18 t/day Manufacturer: FKC / Fukoku Kogyo Inlet cons: 10 % Outlet cons: 30 % |
FKC / Fukoku Kogyo | SHX - 350 x 2,00 | 350 mm Screw diameter | 18 t/ 24h |
1 available |
Pulp Press ComecartPlate width: 800mm Plate length: 1200mm Leakage rate: 78° SR Mixture temperature: ~50° C Phase of dryness: 5-6.5 Maximum production: 90 Tons/day Dry content: Absolute dryness 46-48% (46% guaranteed) Outlet width: 1500mm Working width: 1600mm Minimum knife speed: 58 RPM Maximum knife speed: 97 RPM Length of upper forming belt: 12.100mm Length of upper forming belt: 12.700mm Length of upper felt, high-efficiency press: 8600mm Length of upper felt, high-efficiency press: 8600mm |
Comecart | — | 800 mm | 90 t/day |
1 available |
Twin roll wash press TRPB - 924 LSecond hand wash press consisting of: Press Manufacturer: Metso Type: Twin roll press TRPB - 924 L Hydraulic system: Manufacturer: Metso Type: TRPH-SPUC Hydraulic unit: Manufacturer: Hägglunds Type: C009 0402 Screw press: Manufacturer: Fukoku Kogyo Type: FKC / SHX-350 x 2000L Screw conveyor: Manufacturer: Metso Type: RKBD 5557 |
Metso | Twin Roll wash Press | — | — |
