Conveyor and feeding belts
| Main image | Name | Producer | Type | Size | Capacity |
|---|---|---|---|---|---|
1 available |
Pulp screw conveyor made by Metso 5,7 mPulp screw conveyor made by Metso 5,7 m net ca 4,8 m |
Metso | — | net ca 4,8 m | — |
| — | Reject conveyor ca 7 m |
German | — | 7 m length 50 cm width | — |
1 available |
Vibrating Conveyor/feeding belt |
Carrier Europe | — | — | — |
1 available |
Pulp bale handling / feeding system for pulperSecond hand pulp bale handling system Capacity: 150 bales / hour (weight 250 Kg) 2 stack-pulp units: 2 bales horizontal, 4 bales vertical Moisture: 3-10% Stacks: Size: w:700-1000mm, h: 1200-2100mm, l: 1200-1800mm Weight: max. 2000 kg Single bales: Size: w:700-1000mm, h: 400-550mm, l: 600-900mm Weight: min.200kg - approx. 250 kg |
— | — | — | — |
1 available |
Unused 40m reject conveyor screwsUnused reject conveyor screws overall length ca 40 m can be assembled in different lengths |
— | — | ca 40 m overall length | — |
1 available |
Pulper feeding belt made by SicmaUsed pulper feeding belt consisiting of 2 units Usable for pulp bales 1: L=5.300mm Center distance: 5300mm Width: 900mm Speed: 10m/min 2: L=4.200mm Center distance: 4200mm Width: 900mm Speed: 10m/min |
Sicma | — | — | 10 m/min |
1 available |
Pulper feeding belt with scale and dewiringUsed pulper feeding belt / ascending conveyor belt in very good condition. Equipped with scale and bale dewiring unit |
European | Feeding belt with scale and dewiring | ca 45 m length | — |
