Recently listed

Main image Name Producer Type Size Capacity

Thickener Ahlstrom 5000 mm

inlet: 2-4% otro
outlet: 5- 6 %
SR: 30 -35° SR
drive: 11 KW

Drum length: 3,2 m net

overall length: 4,5 m approx.

height: 2950 mm
max weight: incl. water 17400 kg

Ahlstrom PRS 2030-1R 5000 mm 125 t/24h

Graphical paper machine 3750 mm

sale trim width: 3750 mm

speed: 1050m/min

grammage: 70-170 GSM

capacity: 142 000 tpy

•integreated coating machin
Graphical paper machine 3750 mm 142.000 t/y

PM Nipko Softkalander 4200 mm

Voith Nipko Softkalander for the working width of 4200 mm,

 

Softkalander type: Ecosoft  
     
Last use Grammage: 40 - 80 GSM  
Working width: 4200 mm  
Width Flexitherm roll: 4550 mm  
Widthnipco roll: 4350 mm  
Bearing distance: 5760 mm  
Zone qt Nipco roll: 8 pos. 3 neg  
Speed: 1500 m/min  
Line pressure: 10 - 150 daN/cm  
Surface temperature Flexithermal roll: 50 °C  
Temperature of inlet: 40 °C  
Inlet moisture: 6,5 - 7,25 %  
Cooling water temperature: max 28°C  
Cooling water pressure: min 3 bar/Ü  
Condensate: 3 bar /Ü  
Condensate temperature: max 40 - 50 °C  
Roll positions:    
upper roll: 1 Nipco roll Diameter 593 mm
Bottom roll: 1 Flexitherm roll Diameter 813 mm
     
Tension: 400 V  
Tension for frequency controlled drives: 400 V  
Frequence: 50 Hz  
Control tension: 230 V / 50 Hz PLC 24 DC
     
Scope of supply is 1 kalander without spare rolls  
Voith Softkalander 4200 mm working width 1500m/min

Deflaker JJF 250 C

Metso JJF-250-C 350 t/ 24h

Cardboard machine 2850 mm

Grey millboard production machine


Grammage range: 1000 - 2000 GSM
Width: 2850 mm
Capacity: 36 t/day


Consisting of
Approach flow system:
1 Voith size 10 pressure screen
1 Finkh vibrating screen
1 Andritz Mixing pump


Board machine:
2 cylinder mould
Coutch roll


Forming section with:
Forming roll: 1500 mm diameter
Pre press roll: 350 mm diameter
Breast roll: 460 mm diameter
Complete with drive, spare rolls


General refurbishment: 1991
Refurbishment: year 2007, Renewing of cylinder mould with couch roll,
Installation of Siemens S7, Framing in stainless steel
Octopus distributor in stainless steel.
Table, working width 3.000 mm
Length: 6.000 mm


Table
Working width: 3.000 mm
Length: 7.000 mm
With guide roll and embossing calander


Table
Working width: 3.000 mm
Length: 5.500 mm


Length cutting unit
Working width: 4.00 mm
Length: 2.500 mm
With water jet cutting


Steam - Flat dryer
Made by: Schilde
Transport with chains
Working width: 4.800 mm
Dryer length: 18.000 mm
With ventilators
Refurbished: 2008


Table
Working width: 4.800 mm
Length: 3.000 mm
Refurbished: 2007


Gas Dryer
Heating power: 1.400 kW
Made by: Dornier
Working width: 4.00mm
Dryer length: 14.000 mm
With heat exchange and heat recovery
Year: 2007


Flat dryer
Hot air drying
Made by: BSH
Working width: 4.800 mm
Length: 25.000 mm
With 5 Drying chambers
Gas burner Ventilators
Heat recovery
Refurbished: 2008


Table
Length cutting device
Made by: Schohr
Year: 1973


2 Hydraulical layboys

European Cylinder mould 2850 mm 36 t/ 24 h

Tissue Paper Machine

Tissue paper machine for creped tissue paper.

This machine produce for example handtowels. It is equipped with a very good Pama headbox.

The last safety test By Tüv was 2010

Grammage starting at 30 GSM

 

Manufacturer: PAMA
Year: 1958
In production until mid of 2010,

now well preserved (cylinders open for avoiding moisture accumulation, lubrication verified, etc...)
Right hand drive
Production: 30-40 tpd
Type of furnish: waste paper
Width at reel: 2320 mm
Speed on Yankee: 320-350 m/min
Yankee diameter: 3187 mm, metallized in 2001
Yankee operating pressure: 2.5 bar
Press section: 2 presses (1 felt press, 1 yankee)
Dry section: 8 drying cylinders. Canopy hood on the cylinders
Cylinder diameter: 1500 mm
Cylinder operating pressure: 2.5 bar
Steam and condensate system
N° 3 doctor blades
Overhead monorail crane for spool handling

Walkways and stairs

Stock preparation composed of:
N° 8 process pumps
N° 20 cleaners
N° 5 screens
N° 1 deflaker
N° 4 chests
N° 1 vertical agitator

Water treatment system
Vacuum system
Air system
PLC by Siemens (Simatic S7)
Pulper, conveyor belt and refiner not included in the supply

Several spare parts available, including cylinders, felts, rolls, motors, screens, etc...

German manufacturer Creped tissue starting at 30 GSM 2300 mm 40 t/24h max.

Deflaker 1 EM

Voith 1 E M E 1 M 50 t/24 h

Headbox 3060 mm outlet width

Outlet width: 3060 mm

Last product: Decor paper

Grammage range: 40 -140 g

Speed:100-250 m/min

Manufacturer: Hogenkamp Germany

Hogenkamp 3000 mm 90 t/24h

Pulper drive unit / Spare part

Voith Voith AK horizontal

DC drive motors for paper machine

grammage: 70-450 g /m³

speed: 150 m/ min

paper web width: 2200 mm

Direct current motors